Used Hyundai Verna AC Compressor
AC compressor failure on a Verna typically shows up as no cooling with the clutch not engaging, a noise that appears only when the AC is switched on, or a system that loses gas repeatedly from the shaft seal. New OEM compressor pricing is one of the more common reasons buyers come here.
Compatibility
These are the factors that decide whether a used AC compressor will fit your Hyundai Verna. Sellers must address them when they bid, and you see their answers before you accept anything.
- Generations covered
- Verna (2006-2010), Fluidic Verna (2011-2016), Next-Gen Verna (2017-2022)
- Engines
- 1.4 / 1.6 VTVT petrol, 1.4 / 1.6 CRDi diesel
- What changes the part
- Engine, generation, pulley diameter and groove count, clutch connector type, and refrigerant specification
- Interchangeable across the range?
- No. Confirm pulley and connector against the existing unit before ordering.
OEM part number
Hyundai AC compressor part numbers on the Verna generally begin with 97701-. The label sits on the compressor body and is often obscured by road grime — clean it gently before photographing. If the label is unreadable, a clear photograph of the pulley and connector is the next best thing.
Most buyers do not have a part number, and that is fine. Vehicle details plus a photograph of the existing unit are enough for a seller who handles this model.
What a seller must document
- Visual and mechanical inspection of the body, mounting points, ports and shaft seal area for oil leakage
- Pulley and clutch assessment for bearing noise, play and clutch face condition
- Shaft rotation check for seizure, roughness or excessive drag
- Clutch coil continuity and engagement check
- Photographs of the actual unit, including the pulley, connector and label
A compressor cannot be fully validated off the vehicle. Full performance testing needs the unit installed in a charged, leak-free system. No seller may claim a bench test proves cooling performance.
Condition
Sellers must describe body condition, any oil leakage, clutch and pulley condition, and shaft rotation. A unit showing seal weep or clutch damage should not be offered at all, and misdescribing one is grounds for removal.
Warranty
Sellers state the warranty they offer on every compressor bid, and Sasta Spares records it and enforces it. Installation matters here more than on most components: the system must be flushed, the receiver drier or accumulator replaced, the correct oil type and quantity used, and the system properly evacuated before charging. A compressor destroyed by debris from a previous failure or by incorrect oil charge is not a claim against anyone.
Two sides. One marketplace.
Tell us the part you need and verified sellers come to you with photographs, condition and price. Or browse what they already have listed.